- Using a Washing Up Liquid for a Blocked Toilet
- Additional Approaches
A blocked toilet is a headache that may lead to a slew of issues. It’s one of those pesky problems that always seem to appear at the most inopportune times. It is feasible to unblock a toilet without using a plunger by utilizing something that we share in common in our household cabinets.
Using a Washing Up Liquid for a Blocked Toilet
Because using washing-up liquid to unblock a toilet eliminates the need for a plunger, it’s a good option if you’re in a hurry or unfamiliar with the plumbing in a new place.
You’ll need the following items to complete this method:
· Washing up liquid
· A bucket
· Bicarbonate of soda
Step 1: Pour in the Washing Up Liquid in the first step.
Pour about half a cup of dishwashing liquid into the toilet bowl to get started. Criss-cross the washing-up liquid across the water’s surface as well as along the sides to make a ring around the waterline.
Step 2: Add Hot Water After Waiting
To dissolve the clog, let the washing-up liquid sit undisturbed for around half an hour. Fill the bucket halfway with hot water and pour from waist height into the toilet. The power of the water dropping from such a great height should help to remove the obstruction.
Step 3: Let it sit for ten minutes.
After around 10 minutes, flush the toilet once more. If you’re lucky, this will clear the obstruction entirely, and you’ll be set to go.
Step 4: If necessary, repeat the process.
If the clog hasn’t been eliminated, but the water level is beginning to fall, repeat the process with the washing-up liquid and hot water, and the clog should be cleared.
Step 5: Vinegar and Bicarbonate of Soda
Put a mug of bicarbonate of soda and two cups of vinegar into the toilet bowl after you’re sure there’s no more obstruction. Allow this mixture to bubble for about 30 minutes. Any residual material will be broken apart as a result of this. Finish by flushing the toilet one final time to get rid of any remnants.
Suppose washing up liquid doesn’t work or you don’t have enough on hand. In that case, there are a variety of different options to consider. Clingfilm, wire coat hangers, and water bottles are all examples of these options.
This method of unclogging a toilet has split popularity because it is solely dependent on water pressure and the clingfilm barrier. With this strategy, you have a better chance of success if your home has intense water pressure and you obtain a good seal.
To begin, use an old towel to dry the toilet’s surface behind the seat. Cover the whole surface of the toilet bowl with at least three layers of clingfilm. Ensure there are no cracks in the cling film and that the seal is as airtight as possible. If there are any holes, the air will be able to escape, rendering this procedure useless.Flush the toilet after you’re confident that the seal is as excellent as it can be. Because of the pressure, the clingfilm should expand upwards. Carefully press down on the clingfilm that has been elevated. The suction should be reversed, and the obstruction should be pushed down into the drain.
Now, this tip is a little unpleasant and can indeed be dirty if you’re not cautious. Still, it works, mainly if the toilet bowl is also full.
Before you begin, put on rubber gloves and old clothes, and cover the floor with newspaper or another disposable covering. For this method, you’ll need to remove some of the water from the toilet. You may use any container to empty the water into a bucket or the sink. Still, we recommend selecting one that can be thrown away after you’re finished. Remove just enough water to allow you to reach into the bowl without water splattering over the sides. Next, take a huge plastic bottle and cut the bottom off.
The bottle’s neck must be sealed; use it, or place your thumb over the top if you still have the lid. If nothing of these approaches works, wrap the neck with clingfilm and secure it with an elastic band. This will generate the vacuum necessary for the process to operate.
Push the open end of the bottle into the toilet bowl and forcefully plunge it up and down. Ensure that it remains submerged during the operation. This action creates a vacuum in the pipes, which pulls the obstruction down into the main drain.
Depending on what created the obstruction, this last method might be dangerous. When performed in conjunction with other ways, such as the washing up liquid or water bottle tricks, this trick has the highest chance of succeeding. Using the two approaches in tandem can guarantee that the obstruction is completely removed, rather than merely poking a hole in it.
Be careful to put on old clothes or disposable overalls before using this technique, and always use rubber gloves. Unwind a wire coat hanger until it is entirely straight. Push one end into the toilet, bending one end upwards to make a hazy U shape. Simply pull and push on the obstruction until it breaks up and drains freely into the primary drainage system once it is in place.
The project will take around a half hour to complete, including the 20 minutes you’ll need to wait for the bowl to clear. So, for physical work, you should set aside around 10 minutes. Compared to a more traditional approach, which might take up to half an hour of furious diving, this is a straightforward procedure.
This method does not work for all clogs, but if it does not clear the blockage the first time, many have claimed success by repeating steps 1-3. Some people said that they performed this at night and that the blockage was gone the following day. And being able to unclog a toilet without getting your hands soaked with toilet water? It’s well worth your time to attempt this trick.